Ok now you're all cabled up - make sure there's no conflicts from other devices
you may have fixed to your COM ports (modems, digital cameras etc), you need to configure
your unlock program so it will read the phone. Note which COM port you're plugged into
(should be 1 or 2) and click the relevant COM port option in the program. As an example
the presentation is based on Nokia Tool ASM-C By PRO which is the most reliable software
for that job ! (Supports almost all Nokia phones from 51xx and above)
Unlock job
Start Nokia Tool ASM-C By PRO and Click the relevant COM port, and all things going well,
you should be up and running! If for some reason you can't make it work try the other COM
port. If things still aren't good, you should look at any other devices you may have
running.....(usually a modem) And then
click on Read ME button
Once the port is configured corectly and you clicked the Read ME button the
phone Data will fill the fields of Nokia Tool.
Then... Click Open All button and your phone will be free of all locks
Tutorial written By Jamie
